We are more than an aluminium alloy solution provider.
Do you need consumer aluminium alloy products or learn more info about aluminum alloy prices?
3 days ago The effects of homogenization temperature at 465°C and different homogenization times (6h/12h/24h/36/h/48h) on the microstructure and mechanical properties of as-cast 7075 aluminum alloy were studied using optical microscopy (OM),
In the present study, two dissimilar aluminium alloys (AA7075 and AA1200) were successfully joined by friction stir welding and their mechanical properties were
The microstructural characteristics and mechanical behaviour of aluminium matrix composites reinforced with Si-based refractory compounds (SRC) derived from rice husk
Mechanical properties of aluminium casting using sands from Gidan Mangoro, Tagwai Dam, Tungan Mallam, Wuya and Zungeru in Niger State of Nigeria was evaluated
4 days ago This study investigates the mechanical integrity of the friction stir processing of 7075 aluminium alloy impregnated with palm kernel shell ash, cow bone ash, t
Reinforcing aluminium metal with bagasse ash as a source of silica and alumina particulate will yield a material that displays combination of physical and mechanical properties of
unreinforced alloy was obtained at 7.5 wt% snail shell addition. The maximum hardness, impact, compressive and tensile strengths obtained are 118±4 HV, 88 J, 552±20 MPa
This paper presents a review on improvement of aluminium alloy for engineering application. The study shows that inclusion of agro industrial waste improved
3 days ago The effects of homogenization temperature at 465°C and different homogenization times (6h/12h/24h/36/h/48h) on the microstructure and mechanical properties of as-cast 7075 aluminum alloy were studied using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray
In the present study, two dissimilar aluminium alloys (AA7075 and AA1200) were successfully joined by friction stir welding and their mechanical properties were investigated by conducting hardness, tensile and impact tests on the welded
This study investigated some of the mechanical properties of cast aluminium alloy namely; tensile strength, impact, and hardness, and the microstructure of the locally recycled
Mechanical properties of aluminium casting using sands from Gidan Mangoro, Tagwai Dam, Tungan Mallam, Wuya and Zungeru in Niger State of Nigeria was evaluated according to the
The microstructural characteristics and mechanical behaviour of aluminium matrix composites reinforced with Si-based refractory compounds (SRC) derived from rice husk were investigated. The reinforcement materials (SRC) were synthesized using a carbothermal processing
Mechanical properties of aluminium casting using sands from Gidan Mangoro, Tagwai Dam, Tungan Mallam, Wuya and Zungeru in Niger State of Nigeria was evaluated according to the American Foundry Society (AFS)
4 days ago This study investigates the mechanical integrity of the friction stir processing of 7075 aluminium alloy impregnated with palm kernel shell ash, cow bone ash, t Nigeria. Search for other works by this author on: The importance of this study lies in the potential application of these reinforcements to enhance the mechanical properties of
Reinforcing aluminium metal with bagasse ash as a source of silica and alumina particulate will yield a material that displays combination of physical and mechanical properties of both the metal matrix and the
unreinforced alloy was obtained at 7.5 wt% snail shell addition. The maximum hardness, impact, compressive and tensile strengths obtained are 118±4 HV, 88 J, 552±20 MPa and 211 ± 4.8 MPa equivalent to 21, 25, 19 and 36 percent increase respectively relative to un-reinforced aluminium-silicon alloy. Hence, mechanical and physical properties
This paper presents a review on improvement of aluminium alloy for engineering application. The study shows that inclusion of agro industrial waste improved mechanical properties of the developed material. Keywords: aluminium metal matrix, fly ash, graphite, reinforcement, rice husk
In the present study, two dissimilar aluminium alloys (AA7075 and AA1200) were successfully joined by friction stir welding and their mechanical properties were investigated by conducting hardness, tensile and impact tests on the welded
unreinforced alloy was obtained at 7.5 wt% snail shell addition. The maximum hardness, impact, compressive and tensile strengths obtained are 118±4 HV, 88 J, 552±20 MPa and 211 ± 4.8 MPa equivalent to 21, 25, 19 and 36 percent increase respectively relative to un-reinforced aluminium-silicon alloy. Hence, mechanical and physical properties
The microstructural characteristics and mechanical behaviour of aluminium matrix composites reinforced with Si-based refractory compounds (SRC) derived from rice husk were investigated. The reinforcement materials (SRC) were synthesized using a carbothermal processing
Mechanical properties of aluminium casting using sands from Gidan Mangoro, Tagwai Dam, Tungan Mallam, Wuya and Zungeru in Niger State of Nigeria was evaluated according to the American Foundry Society (AFS)
Mechanical properties of aluminium casting using sands from Gidan Mangoro, Tagwai Dam, Tungan Mallam, Wuya and Zungeru in Niger State of Nigeria was evaluated according to the
This study investigated some of the mechanical properties of cast aluminium alloy namely; tensile strength, impact, and hardness, and the microstructure of the locally recycled
This paper presents a review on improvement of aluminium alloy for engineering application. The study shows that inclusion of agro industrial waste improved mechanical properties of the developed material. Keywords: aluminium metal matrix, fly ash, graphite, reinforcement, rice husk
4 days ago This study investigates the mechanical integrity of the friction stir processing of 7075 aluminium alloy impregnated with palm kernel shell ash, cow bone ash, t Nigeria. Search for other works by this author on: The importance of this study lies in the potential application of these reinforcements to enhance the mechanical properties of
Reinforcing aluminium metal with bagasse ash as a source of silica and alumina particulate will yield a material that displays combination of physical and mechanical properties of both the metal matrix and the
3 days ago The effects of homogenization temperature at 465°C and different homogenization times (6h/12h/24h/36/h/48h) on the microstructure and mechanical properties of as-cast 7075 aluminum alloy were studied using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray
