We are more than an aluminium alloy solution provider.
Do you need consumer aluminium alloy products or learn more info about aluminum alloy prices?
Our PVD coatings were specially developed to reduce friction, increase surface hardness, and reduce heat cracks of all aluminum die casting molds. Besides increased tool life the coatings allow longer maintenance cycles and faster tool
The properties of aluminium lattice composites are greatly affected by the support concept, which may take the form of a continuous or fractured fibre structure.
Studies have shown that the Al/SiC composite coating can be prepared by spraying Al/SiC mixed powder with flame and the hardness and wear resistance of the
Schematic diagram of a nanoindentation simulation and atomic force microscopy measurement result of aluminum with a native oxide layer. a) Aluminum
Our PVD coatings were specially developed to reduce friction, increase surface hardness, and reduce heat cracks of all aluminum die casting molds. Besides increased tool life the coatings allow longer maintenance cycles and faster tool
In the current work, Al-Mg alloy coating samples were prepared by using the electric arc spray technique on SS400 with three different spray modes. The structure morphology, phase composition, porosity, microhardness, adhesion and wear resistance of the coating were
The properties of aluminium lattice composites are greatly affected by the support concept, which may take the form of a continuous or fractured fibre structure. Focusing on composite-coated aluminium materials, this paper examines their microstructure and
Binary Al-transition metal (M: Cr, Ni, Mo, Si, Ti, Mn, V, Nb) alloys, produced by high-energy ball milling and subsequent cold compaction, have exhibited significantly high hardness and corrosion resistance compared to any commercial Al
In more intensive applications, a ‘harder’ anodizing approach is used. Hard anodizing involves the use of sulphuric acids and other additives to produce thicker, harder, anodized layers. This helps improve hardness and wear resistance while moderay improving corrosion
Studies have shown that the Al/SiC composite coating can be prepared by spraying Al/SiC mixed powder with flame and the hardness and wear resistance of the coating can be significantly improved compared with pure Al coatings (Ref 21,
Three Al coatings (pure Al, AlSi10Mg, and Scalmal-loy) are compared under a similar deposition condition. The top view of the coating revealed the highest deformation (high flattening) in
Schematic diagram of a nanoindentation simulation and atomic force microscopy measurement result of aluminum with a native oxide layer. a) Aluminum substrate coated with three alumina thicknesses 1.2 nm, 1.8 nm, and 2.4 nm. b) AFM image of an alumina layer on an aluminum
ZINMAG\'s revolutionary coating, comprising Zinc, 6% Aluminium, and 3% Magnesium, offers a breakthrough in corrosion resistance. When exposed to severe environments, including livestock, chemical, and marine areas (C5 classification), ZINMAG proves its exceptional durability and
The results show that the surface quality and hardness of the coated samples were higher than those of the 7A04 aluminum alloy and that the HA+Ti+ta-C coating possessed the highest hardness of 34.23
